EC Time Clock Series (Not in Production)
EC20 EC50 EC200 EC500 EC700
EC Clock Offline (TAH)
- Please Restart the Clock (it might come back online!)
- Menu>Settings>Set IP>Use DHCP
- Is Use DHCP set to Yes/No?
- If No: Did you assign a static IP?
If Yes: Continue.
If No: Set Use DHCP to Yes.
If you’re unsure: Use DHCP
- If DHCP is set to yes: Menu>Settings>Set IP>Host PC Settings
- a. 204.011.236.132 Port: 80
- b. 204.011.236.181 Port: 5010
- Check Connection status and mac address Menu>Settings>Set IP>WiFi>Link Information
- Connected, Disconnected, or Limited?
- If limited: Confirm correct password or restart router
- Connected, Disconnected, or Limited?
- Using Wifi or Ethernet?
- If Wifi: Menu>Settings>Set IP> WiFi>Use WiFi: Set to Yes
- Now Connect to WiFi: Menu>Settings>Set IP>WiFi>Search WiFi Hub>Select Desired WiFi Network> Use T9 (refer to phone keypad) to enter password.
- If Ethernet: Menu>Settings>Set IP> WiFi>Use WiFi: Set to No
- Menu>Settings>Set IP> Check if the clock is pulling an IP address
- If connected: Try b (or a)
If Limited Connectivity (incorrect password? WiFi Working)
If Disconnected: Menu>Settings>Advanced>Restore Factory Settings (Confirm? Yes)
- Once Factory Restored, Re-do steps 6,7,8.
- Try mobile hotspot (google it for your phone) If the hotspot works, but your network does not, make sure a firewall is not blocking the port! (80,5010)
- Are you using a Ubiquiti AP access point by chance? If yes: Set up a generic router just for the clock. (or ethernet cable)
Hope this helps. – Kevin
*T9 notes for wifi password:
Hit ^ to get special characters
Hit 0 first to get capitals
Hit Menu to backspace